As the use of Power over Ethernet (PoE) grows in popularity, so does the use of PoE devices that require more and more power. The latest PoE standard set by the IEEE is 802.3bt Type 4, which means delivery of up to 90 watts. This has opened up a world of new possibilities for PoE users.
This blog post discusses two variants of the 802.3bt standard, some of the devices you can power with Type 4 PoE, as well as the role of an essential link in a PoE network: the midspan injector. We conclude with some information about Transtector’s new line of midspan PoE injectors that meet 802.3bt Type 4 standards.
Differences Between 802.3bt Type 4 and Type 3 Standards
The IEEE 802.3bt standards, also known as PoE++ (Power over Ethernet Plus Plus), define the specifications for delivering power over Ethernet cables. These standards enable the simultaneous transmission of data and power, allowing devices to receive power directly from Ethernet infrastructure. The IEEE 802.3bt standards were developed to address the increasing power demands of various network devices, including high-power devices.
There are two main variants of the IEEE 802.3bt standards:
- IEEE 802.3bt Type 3: This standard is also known as 4-pair Power over Ethernet (4PPoE). It supports power delivery of up to 60 watts and uses all four pairs of wires in an Ethernet cable to transmit power. Type 3 devices typically require a minimum of Category 5e or higher-grade cables.
- IEEE 802.3bt Type 4: This standard is known as 4-pair Power over Ethernet (4PPoE) Plus. It supports power delivery of up to 90 watts, which is 30 watts higher than Type 3. Type 4 devices also utilize all four pairs of wires in an Ethernet cable for power transmission and require a minimum of Category 6 or higher-grade cables.
Both Type 3 and Type 4 PoE devices are backward compatible with previous PoE standards, such as IEEE 802.3at (PoE+) and IEEE 802.3af (PoE). This backward compatibility allows them to work with older PoE devices and infrastructure, providing flexibility in network deployments.
High-Power PoE Devices
With the ability to handle 90 watts, an 802.3bt Type 4 PoE is suitable for powering a wide range of devices that require higher power consumption. Some examples:
- High-power wireless access points: Modern Wi-Fi access points often require more power to support multiple radios and advanced features such as beamforming, multi-user MIMO, and high-density deployments.
- PTZ (pan-tilt-zoom) cameras: These surveillance cameras often come with powerful motors for pan, tilt, and zoom functionality. The increased power provided by Type 4 PoE can ensure reliable and continuous operation of these cameras.
- Videoconferencing systems: Sophisticated videoconferencing setups that include large displays, multiple cameras, and audio equipment may require higher power to operate effectively.
- Digital signage: Large digital displays used for advertising or informational purposes may need additional power to drive their high-resolution screens and other integrated components.
- Industrial equipment: Certain industrial devices, such as control systems, sensors, and monitoring equipment, might require higher power due to their operational requirements and robustness.
- PoE lighting systems: High-power PoE can be utilized to power advanced LED lighting systems in commercial buildings, enabling centralized control and energy-efficient operation.
- VoIP phones: Voice over Internet Protocol (VoIP) phones are commonly designed to operate within the power limits of IEEE 802.3af (Type 1) and 802.3at (Type 2) PoE. But additional power may be required for more advanced VoIP phones with features such as large color displays, touchscreen interfaces, built-in cameras, Bluetooth connectivity, or advanced speaker systems.
- PoE-powered displays: Certain displays, such as high-resolution monitors, interactive touchscreens, and digital kiosks, may require higher power levels to operate effectively.
- Industrial equipment: Various industrial devices and machinery, such as motor controllers, programmable logic controllers (PLCs), and industrial sensors, may require higher power for their operation.
- Access control systems: Access control devices, including card readers, biometric scanners, and door locks, often require power to operate. Type 4 PoE can provide the power needed for these devices, eliminating the need for separate power supplies and facilitating centralized control and management.
- Remote IoT devices: Internet of Things (IoT) devices deployed in remote or hard-to-reach locations may benefit from the higher power capabilities of Type 4 PoE. These devices can include environmental sensors, surveillance cameras, and remote monitoring equipment.
- Building automation systems: Building automation systems encompass a wide range of devices used for controlling and monitoring various building functions. Devices such as HVAC controllers, lighting controllers, and energy management systems may require higher power levels to operate efficiently.
- Medical equipment: Some medical devices, such as diagnostic equipment, patient monitoring systems, and healthcare IoT devices, may have higher power requirements.
Where the Midspan PoE Injector Fits In
A midspan PoE injector, also known as a PoE injector or PoE midspan, is a device used to inject power into an Ethernet cable to provide power to PoE-enabled devices. It is typically used in situations where the existing Ethernet switch or network infrastructure does not support PoE.
A midspan PoE injector is installed between the Ethernet switch and the powered device. It injects power into the Ethernet cable without affecting the data transmission. The injector is connected to a power source, such as an AC outlet, and typically has multiple Ethernet ports to connect the switch, powered devices, and network devices.
The midspan injector provides power to the Ethernet cable using the spare wire pairs in the Ethernet cable, following the IEEE 802.3af or IEEE 802.3at PoE standards. It separates the power and data signals, ensuring that the powered devices receive the necessary power while maintaining data integrity.
Midspan PoE injectors are commonly used in scenarios where only specific devices require PoE, such as IP cameras, wireless access points, VoIP phones, or other network devices. By using a midspan injector, PoE functionality can be added to the network without the need to replace the existing non-PoE switch or infrastructure.
It's important to ensure compatibility between the midspan injector and the powered devices. Different midspan injectors support different power levels, so it is essential to choose an injector that can deliver the required power for the specific devices being powered.
Transtector’s New 10-Gig PoE++ Injectors
Transtector has just released a new line of midspan, 10-gigabit PoE++ injectors that comply with IEEE 802.3bt standards. The IEEE designation means they support the higher power levels of the Type 4 standard (up to 90 watts). They power such devices as IP cameras, IP switches, IP phones, smart lighting, security apparatus such as card readers, traffic systems, access points, machine vision, and more.
Key Features:
- Dual Functions: Carry data signals while also providing electricity to network devices over Ethernet cables
- Dependable: Certified in U.S. by FCC and internationally by CE, IEC, and EN
- Easy to Install: Compact size and include power supply, wiring diagram, clearly labeled ports
- Multi-Applications: Transportation, industrial automation, security, telco, building automation, Wi-Fi and wireless, lighting, etc.
Our new midspan, 10G PoE++ injectors are in-stock and available for same-day shipping. For more info, visit Transtector.com or contact us at +1 (208) 635-6400.